Many cross stitch embroidery friends like to embroider cross stitch in their spare time at home. It is a problem how to make the finished product after embroidery. It is too expensive to take it to the mounting shop for mounting. They want to mount it by themselves but do not know how to mount it. In order to let more cross stitch embroidery friends learn to mount it by themselves, I specially recorded the production steps of mounting cross stitch so that more friends can learn to do cross stitch by themselves and enjoy the fun of DIY, You will love this process and get out of control. After a while, you will find that there are more cross stitch works of large and small. Are you particularly proud. Don't gossip, start with:

First of all, according to the size of the cross stitch embroidered, buy appropriate photo frames, glass plates, backboards, tablets, pendants, etc., which can generally be completed in one shop.

The second step is to lay the embroidery on the flat table. Put a thin blanket under the embroidery, iron it with an iron, then cut it according to the frame size and dry it.

Step 3: take out the photo frame, cardboard, embroidery, glass plate, back plate and accessories.

Step 4: put the frame face down, tear off the protective film on both sides of the plexiglass, put it into the frame, and then put the paper card. Then, put the embroidered article down and put it right, and finally put it into the back plate. (there are two ways to fix the back plate. One is that the frame is slotted, and the back plate is equipped with rotary buttons, which can be fixed after turning. The other is that the back of the frame is not slotted, and most of the cross embroidery frames are not slotted. The back plate needs to be put on the back of the frame with a pressure plate, and the back plate can be fixed after the pressure plate is rotated.) (there are also two kinds of hanging frames. One is the slotted frame, which can be hung by directly hanging s on the back plate with traceless wall nails. The other is the frame with no slot on the back. Most of the cross embroidery frames are not slotted, so it is necessary to hook the iron sheet on the back of the frame and then hang it on the wall.) See the following figure:

Step 5: open the front and install the cross stitch. OK, a good work is successful!