How to judge the quality of solid wood lines

release date:2019-09-09 00:00 source:http://en.jxtaisheng.cn Click:

The products made by the solid wood line factory are glass fiber reinforced cement decorative lines, which are a kind of exterior wall decorative materials. The most prominent feature of the components is that they have excellent tensile and bending strength and good resistance. This material is especially suitable for making decorative shapes and reflecting the intense texture. It can bring you different visual experiences. The product of solid wood line factory is an indispensable decorative material wood line in the process of home decoration. Good visual effect is very important. Only in this way can we buy suitable solid wood lines and make their application effect better.


The product of solid wood line factory is an indispensable decorative material wood line in the process of home decoration. Good visual effect is very important. Only in this way can we buy suitable solid wood lines and make their application effect better. Decorative solid wood lines are generally not made on site, but are machined by professional wood line factories. There are many kinds of colors and patterns, which can meet the needs of various decorative characteristics; According to its shape, it can be divided into internal corner line, external corner line, decorative plate line, etc; According to the material, it can be divided into wood products, gypsum products and plastic products; In terms of the proportion used in the market at that time, the proportion of wood decorative lines was large, accounting for about 80% of natural wood lines.


In the production of ecological board lines, sometimes due to the use demand, it is necessary to process the plates into curved ones. Friends who know about wood know that it is difficult to do the bending treatment of plates. We need to understand the specific bending methods so that we can produce lines that meet the application needs. At present, there are two kinds of bending methods used in the production of ecological board lines. In the early days, because the toughness of the board is not enough, the sawing method was mostly used. First, the wood was sawn into the wool with bending characteristics, and then processed into the required mold. This method is easy to cause the fiber to be sawed off, resulting in the low strength of the produced parts, the low yield rate, and the serious waste of wood. The material of the existing ecological board line is relatively special. The pressing method can be used to heat the material first, and then press it to deform the scientific and technological wood line to make the desired bending shape. The bending ecological board line created by the pressing method will not generate waste, and the process is simple and rapid, which is more conducive to environmental protection. It is the most recognized bending method of the board at present. Interested parties can call for advice.


In the application of solid wood lines, if it is the joint between the lines and the door pocket, it can be done with transparent glass glue. If it is a door core plate, it can only be repaired by professional personnel. If the wood door line is not bent, the solid wood base material must be dried. The moisture content of the dried European wood line is about 15% in the South and about 13% in the north; If the panel of the line, such as the wood line manufacturer, selects the density board or plywood, the thicker material must be selected, and the thickness is generally required to be more than 3.7mm; When gluing and compounding, be sure to keep the pressure and set before the glue is dry. The newly made melamine solid wood lines should be laid flat to ensure that the adhesive is completely dry before setting. 2 / 3 anti deformation grooves with a depth of 3 to 4mm are opened on the back of the base material, so that the fixing effect of the lines is better and more favored and recognized by users.


Related tags:Solidwooddecorativeline