Compared with gypsum, solid wood and other traditional materials, EPS composite materials have incomparable advantages:
1. Gypsum is fragile, EPS has good strength, toughness and elasticity, and can withstand normal falling without damage;
2. Gypsum will produce fine fibers and dust, which will damage the respiratory system. EPS is a polymer material formed at high temperature through the mold, and will not produce any fine dust fibers, etc., which is harmless to the human body;
3. Gypsum and solid wood are afraid of water and moisture, and are easy to crack. In case of moldy weather and excessive humidity, there will be moldy and deformation, and EPS material has no such problems. Solid wood is afraid of moths. EPS material is high polymer material, and insects are not interested in it;
4. Solid wood is heavier, gypsum is heavier, logistics, installation and maintenance are troublesome, and the cost is very high. EPS material is very light, only about 5% of gypsum products / wood products of the same volume. The installation is very convenient, the pasting method is very simple, and the workload is only one third to one fifth. It can be operated by one person, holding the product in the left hand and installing it in the right hand, saving installation, use and maintenance costs;
5. Solid wood needs to be felled, and gypsum will produce dust, which is not very friendly to the environment. EPS is made of polymer material, which is non-toxic and harmless to the environment. The key words of the new century are environmental protection and low carbon. EPS material meets this demand and is the trend of the times;
6. EPS decorative products have been used in Europe and America for more than ten years. Now, they are being popularized in China. The future trend is that EPS composite materials will become the mainstream decorative materials in China due to its superior performance and environmental protection.
Outdoor line Chengdu decorative line company - Chengdu photo frame line - decorative line Chengdu decorative Photo Frame Line Factory Tel: 1388063049
Combining the advantages of indoor line technology, technology and equipment, the outdoor line products developed by the company have higher substrate density and fire rating than other similar products, and have a stronger, more delicate and more beautiful appearance.
EPS indoor composite decoration material is made of high-density expanded polystyrene as the base material, and is subject to special surface treatment. Material saving, light weight, convenient transportation and installation, energy saving, environmental protection and low carbon.
EPS line is a new generation line after gypsum, PU and wood line. It involves a wider range of products, is more energy-saving, more environmental friendly, and has a higher cost performance ratio.
The interior lines seem to be similar to the outdoor lines, but in fact, there are great differences in process requirements and fineness. For example, the outdoor line is a large truck, and the indoor line is a high-end car.
EPS material characteristics
1. Low construction cost: the surface coating has been completed, which can be sawn and glued to save construction time;
2. The product can resist moth, moisture and mildew;
3. Extremely low thermal sensitivity coefficient, no bending, no falling off, no cracking, high durability;
4. Light weight, good hardness, elasticity and good toughness, easy to cooperate with the curved ceiling modeling of the project, low loss rate and easy to handle;
5. The product has a synthetic surface layer, all of which are off white products. After construction, the hand can spray paint as required;
6. Integration: can be overall planning and design, factory production, simple and elegant atmosphere;
8. Corrosion resistance: acid and alkali resistant, absolutely free of insect and termite;
9. Fire resistance: grade B1 raw materials are used, which do not ignite or support combustion;
10. Environmental protection: save more than 90% of materials, green and pollution-free, non-toxic and odorless.